FAG 3215-BC-JH Angular Contact Ball Bearings

A1:12 mm; L3:51 mm; s1:15.5 mm; A:32 mm; N:19mm; C0:6.65 kN; T min.:-20 °C; S:12.7 mm; G:M6x1; Designation of housing:T204N-;

UPC:782475334247; Ship Weight:2.6 LB; Max Bearing Speed:5250 rpm; Bearing Series:206 Series; Ring Size:Standard; Base to Center Height:Standard; Self Aligning:Self Centering; End Cap Groove:Yes; Anti-Rotation Pin:Yes; d:1.1875 in;

e:19 mm; T max.:100 °C; T min.:-20 °C; B:30 mm; S:8 mm; s1:15 mm; A1:12 mm; d:30 mm; Weight:0.77 kg; J:116.5 mm;

Ship Weight:118 LB; Take-Up Frame Style:TOP ANGLE; Frame Size:50; Brand:Baldor-Dodge; UPC:782475967278; Screw Diameter:1.2500 in; Material Type:CARBON STEEL; Special Coating:STANDARD PAINT; Angle Size:3-1/2 X 3-1/2 X 3/8; Take-Up Frame Travel:60.0000 in;

Precision Class:ABEC 1 | ISO P0; Weight / Kilogram:0.078; D:47 mm; Characteristic cage frequency, FTF:0.41 Hz; Da max:43 mm; UNSPSC:31171504; Maximum Capacity / Filling Slot:No; Outside Diameter:1.85 Inch | 47 Milli; Minimum Buy Quantity:N/A; da min:29 mm;

D3 max:135.23 mm; Characteristic inner ring frequency, BPFI:4.47 Hz; f0:12.1; b max:3.4 mm; d1:81.3 mm; b min:3.1 mm; B:33 mm; a min:4.65 mm; d:55 mm; Nlim:8,500 rpm;

S:12 mm; s1:36.95 mm; T min.:-20 °C; Designation of bearing:ES211G2; d:55 mm; T max.:100 °C; C:43.55 kN; d1:74.5 mm; J:184 mm; N:19mm;

A3:3.5 mm; B:21.4 mm; S:7.5 mm; G:R1/8"; d:22.22 mm; A2:35.9 mm; H:124 mm; C:14 kN; T min.:-40 °C; J:99 mm;

Min operating temperature, Tmin:-20 °C; Nlim (grease):3,800 rpm; E:130 mm; Static load, C0:262 kN; B:51 mm; ra max:2 mm; Dynamic load, C:223 kN; rs min:2.1 mm; Radial clearance class:CN; Brand:NTN;

Min operating temperature, Tmin:-20 °C; Rolling Element:Ball Bearing; Precision Class:ABEC 1 | ISO P0; Outside Diameter:1.85 Inch | 47 Milli; Radial clearance class:C3; Characteristic inner ring frequency, BPFI:7.87 Hz; Fatigue limit load, Cu:0.23 kN; D:47 mm; rs min:0.3 mm; Other Features:Deep Groo

s1:21.5 mm; Designation of bearing:UC306-19G2; C0:15.2 kN; Designation of housing:F306-; A2:44 mm; N:16mm; Recommended tightening torque for set screw:3.7 Nm; J:95 mm; B:43 mm; A1:15 mm;

H:146 mm; A2:38 mm; Weight:3.67 kg; C0:29.2 kN; L3:95 mm; C:43.55 kN; A1:22 mm; T min.:-40 °C; S:12 mm; B:32.5 mm;

d:25.4 mm; B:34 mm; m:5.5 mm; T min.:-20 °C; r:0.6; Weight:0.2 kg; SW:3.18 mm; C:17 mm; C0:7.88 kN; C1:4.3 mm;

Bearing Series:206 Series; Housing Coating:Powder Coat; Grease Type:Unirex N2; Bearing Locking Device:Eccentric Collar; Bearing Insert Material:Steel; Ball Grade:Class 10; Expansion Type:Non-Expansion; Anti-Rotation Pin:Yes; Bearing Outer Ring Material:Steel; Flinger Material:None;

J:216 mm; C0:40 kN; T min.:-20 °C; Weight:5.72 kg; Designation of bearing:UC213G2T20; T max.:200 °C; B:65.1 mm; A2:73.7 mm; L:160 mm; Z:82.4 mm;